Backlight is no longer working
Replace your old battery with a new one. If you have the option, plug in a 9-volt adapter to ensure the scale is receiving enough power for the display's backlight.
----
OUT2 error
This may be the result of a damaged load cell. This model cannot use the calibration method to bypass the error.
----
My scale still fluctuates after I place weight on it
Be sure to keep the scale on a flat even surface while weighing items. Always operate the scale at a comfortable room temperature. On some occasions, electronics can interfere with the performance of your scale; be sure to keep approximately 3 feet away.
----
Valid for Alimento Digital Workhorse, Model #: 136DK