How to set up your clock

• Before setting up your clock, please make sure to have your device on "clock mode" instead of "timer mode". If you are on timer mode, press the 'M', 'START/STOP', and 'S' buttons down simultaneously to return to clock mode.
  
  
• While in "clock mode" press and hold down the 'M' button until the hour number flashes.
  
  
• Use the 'S' button to adjust the hour, and then press the 'M' button to confirm.
  
  
• [Now the minutes number will start flashing]
  
  
• Again, use the 'S' button to adjust the minutes, and then press the 'M' button to confirm. The clock set up is now completed.
  
  
• Note: The clock is available in 12-hour or 24-hour time format. Simply press the 'S' button to switch between formats.

----

How to power the timer off
Unfortunately, the timer does not power off. The unit goes into clock mode after 5 minutes of inactivity.

----

Timer does not power on
If the unit is brand new, ensure the plastic wrapping is removed from the battery. If you have owned the timer for a long time, try replacing the battery. If the issue persists, please contact our support team to inquire about a replacement.

----

Battery Type
The DR1 timer requires one AAA battery to operate. 

----

Locating the kickstand
The kickstand can be located next to the battery compartment. Simply use the tip of your finger to pull the stand up. [see image link]
DR1_kickstand.JPG