Skip to main content

Search

Product Support

Quick Start Guide (SLR200)

  1. Leave the scale out in artificial or natural lighting to begin battery charging for a couple of minutes. While charging in light you will see a flashing "sun" icon on the LCD. The "sun" icon will stop flashing if the battery charge is complete.

    Note: For a faster battery charge, use the included charge cord to plug into a 5 watt power block (your mobile device's power block); which is not included. The battery icon will start flashing once the charge cord is plugged into the scale, and into an outlet using the power block.

  2. Place the scale on to a hard surface (non-carpet).

  3. While the scale is off, simply step on to the scale to start weighing.

  4. Once you see the LCD flashing your weight, you may step off of the scale for a better look at your result. The weight will continue to hold for approximately 5 seconds after stepping off the scale.