Skip to main content

Search

Product Support

Quick Start Guide (ECO200)

  1. Install the included AAA batteries into your scale's battery compartment.

  2. Change the mode read-out by pressing the kg/lb/st button located on the bottom of the scale.

  3. Set your scale on a hard, and flat surface (non-carpet).

  4. If your scale is on, wait for it to power off before stepping on, as it may need to adjust to the correct zero for accurate measurement.

  5. While your scale is off, step up on to the scale to start weight measurement. Your weight will flash which indicates that the scale had captured your weight; you may step off to view your result.