M-Series NSF Multifunctional Scales

1. Insert the (4) C sized batteries into the compartment located at the bottom of your scale.

2. Place the weighing platform with the removable stainless steel plate onto the 4-hole slots of the scale.

3. Set the scale on a flat, hard, and even surface to ensure proper measurements. You may adjust any of the four feet as desired by turning them.

4. Power on the scale with the black switch located at the bottom right of the scale's body.

5. Select your desired unit measurement by pressing the "MODE" button.

6. Place items on the scale to weigh.

----

Valid for M-Series NSF Multifunctional Scales.  Model #: M6630, M3315, M136