Unit will not power on
If the unit is brand new, please check the batteries for any plastic wrapping, and remove. If you have had the unit for a good period of time, try replacing the battery. If the issue persists, please contact Escali about the product 2-year warranty.

----

How to switch from Celsius to Fahrenheit
Lightly press and hold the 'S/T' key until the thermometer beeps to confirm the mode change.

----

How to set the alert temp

1. Press and hold the 'S/S' key until alert temp flashes.
2. Use the 'M/M' and 'S/T' keys to increase or decrease alert temp setting.
3. Press 'S/S' to confirm.
4. Toggle the alert temp on or off by pressing the 'S/S' key.
5. The word "ALERT" will appear above alert temp if the alarm is enabled.
6. Press 'S/S' key again to disable alarm.

----

Locating the kickstand
The kickstand and battery cover are all one piece. Simply place the tip of your finger into the groove to pull the stand up. [see image link]
DR3_kickstand.JPG

----

Battery type
This unit uses two AAA batteries.